language en
EU DPP Battery Performance Ontology
Release: 2026-07-07
- Modified on: 2026-09-01
- This version:
- https://w3id.org/eudpp/battery-performance/0.3.0
- Revision:
- Version 0.3.0 DRAFT
- Issued on:
- 2026-07-07
- Authors:
- Marc-Andree Wolf
- Nader Jelassi
- Contributors:
- Arnab Sinha
- Source:
- https://eur-lex.europa.eu/eli/reg/2023/1542/oj
- Download serialization:
- License:
- Visualization:
- Cite as:
- EU DPP Battery Performance Ontology. Draft version 0.3.0.
Ontology Specification Draft
EU DPP Battery Performance Ontology: Overview back to ToC
This ontology has the following classes and properties.Classes
Object Properties
Data Properties
- as-of date
- C-rate of relevant cycle-life test
- capacity fade
- capacity threshold for exhaustion
- capacity throughput
- certified usable battery energy
- current self-discharge rate
- cycle-life reference test
- energy round trip efficiency fade
- energy throughput
- evolution of self-discharge rates
- expected lifetime in calendar years
- expected lifetime: number of charge-discharge cycles
- information on accidents
- initial internal resistance of battery cell and pack
- initial round trip energy efficiency
- initial self-discharge rate
- internal resistance increase of pack
- maximum permitted battery power
- maximum voltage
- minimum voltage
- nominal voltage
- number of deep discharge events
- number of full charging and discharging cycles
- number of overcharge events
- original power capability
- power fade
- rated capacity
- ratio between nominal battery power and battery energy
- remaining capacity
- remaining power capability
- remaining round trip energy efficiency
- remaining usable battery energy
- round trip energy efficiency at 50% of cycle life
- state of certified energy (SOCE)
- state of charge (SoC)
- temperature information
- temperature range idle state, lower boundary
- temperature range idle state, upper boundary
- time spent charging during extreme temperatures above boundary
- time spent charging during extreme temperatures below boundary
- time spent in extreme temperatures above boundary
- time spent in extreme temperatures below boundary
Annotation Properties
EU DPP Battery Performance Ontology: Description back to ToC
Developed against the CIRPASS-2 CORE ontology v2.0.5 (refresh of 25 August 2026; P_DPP v2.0.6 of 27 August 2026, MAT v1.0.2). External references are pinned to these versions.Cross-reference for EU DPP Battery Performance Ontology classes, object properties and data properties back to ToC
This section provides details for each class and property defined by EU DPP Battery Performance Ontology.Classes
Accident Eventc back to ToC or Class ToC
IRI: https://w3id.org/eudpp/battery-performance#AccidentEvent
An accident affecting the battery, including when incorporated in the equipment it is powering. Specialises the generic ProductEvent class of the CORE event module, of which MaintenanceEvent is a sibling: an accident is not a maintenance operation. The link to the battery is provided by the CORE event mechanism (no dedicated object property in this module).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-classes
- Product Event c
- is in domain of
- information on accidents dp
Battery Durabilityc back to ToC or Class ToC
IRI: https://w3id.org/eudpp/battery-performance#BatteryDurability
Battery-specific durability data: expected lifetime in calendar years and in charge-discharge cycles, number of full cycles, energy and capacity throughput, capacity threshold for exhaustion. Specialises the cross-sectoral Durability quality indicator (ESPR Art. 2 (22)).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-classes
- Durability c
- is in domain of
- capacity threshold for exhaustion dp, expected lifetime in calendar years dp, expected lifetime: number of charge-discharge cycles dp
- is in range of
- has battery durability op
Battery Performancec back to ToC or Class ToC
IRI: https://w3id.org/eudpp/battery-performance#BatteryPerformance
Container for the electrochemical performance and in-use state parameters of a battery: capacity (rated, remaining, fade), voltage (minimum, maximum, nominal), power capability, round trip energy efficiency, self-discharge rates, internal resistance, cycle-life test parameters, and in-use event counters. Anchored under the cross-sectoral Property class, not under QuantitativeProperty: this is a container grouping several measured quantities, not a quantity itself, and would otherwise inherit hasMeasurementUnit, which has no meaning on a container.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-classes
- Property c
- is in domain of
- C-rate of relevant cycle-life test dp, certified usable battery energy dp, cycle-life reference test dp, initial internal resistance of battery cell and pack dp, initial round trip energy efficiency dp, initial self-discharge rate dp, maximum permitted battery power dp, maximum voltage dp, minimum voltage dp, nominal voltage dp, original power capability dp, rated capacity dp, ratio between nominal battery power and battery energy dp, round trip energy efficiency at 50% of cycle life dp
- is in range of
- has battery performance op
Battery State Recordc back to ToC or Class ToC
IRI: https://w3id.org/eudpp/battery-performance#BatteryStateRecord
A dated record of the values a battery management system updates during operational life. One record per reading; the series of records is the history required by Annex XIII 4 and Annex VII Part B, which describe data that changes over the life of the product rather than a single snapshot. Anchored under dpp:Property and deliberately not under dpp:QuantitativeProperty: this is a container grouping several measured quantities, not a quantity itself, and would otherwise inherit dpp:hasMeasurementUnit, which has no meaning on a container. Which properties belong here follows the 'Data behavioural characteristic: static vs. dynamic' column of the BatteryPass-Ready Data Attribute Long List v1.3, not a local judgement.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-classes
- Property c
- is in domain of
- as-of date dp, capacity fade dp, capacity throughput dp, current self-discharge rate dp, energy round trip efficiency fade dp, energy throughput dp, evolution of self-discharge rates dp, internal resistance increase of pack dp, number of deep discharge events dp, number of full charging and discharging cycles dp, number of overcharge events dp, power fade dp, remaining capacity dp, remaining power capability dp, remaining round trip energy efficiency dp, remaining usable battery energy dp, state of certified energy (SOCE) dp, state of charge (SoC) dp, temperature information dp, time spent charging during extreme temperatures above boundary dp, time spent charging during extreme temperatures below boundary dp, time spent in extreme temperatures above boundary dp, time spent in extreme temperatures below boundary dp
- is in range of
- has battery state record op
Temperature Exposurec back to ToC or Class ToC
IRI: https://w3id.org/eudpp/battery-performance#TemperatureExposure
Container for the thermal exposure of the battery in use: operating temperature information, idle-state temperature range boundaries, and aggregated time spent (and spent charging) in extreme temperatures outside those boundaries. Anchored under the cross-sectoral Property class, not under QuantitativeProperty: this is a container grouping several measured quantities, not a quantity itself.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-classes
- Property c
- is in domain of
- temperature range idle state, lower boundary dp, temperature range idle state, upper boundary dp
- is in range of
- has temperature exposure op
Object Properties
has battery durabilityop back to ToC or Object Property ToC
IRI: https://w3id.org/eudpp/battery-performance#hasBatteryDurability
Links a battery to its durability data. Specialises the cross-sectoral dpp:hasProperty (Product -> Property); the chain BatteryDurability = dpp:Durability = QualityIndicator = QuantitativeProperty = Property was verified in P_DPP v2.0.0.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-properties
- has Property op
- has domain
- Battery c
- has range
- Battery Durability c
has battery performanceop back to ToC or Object Property ToC
IRI: https://w3id.org/eudpp/battery-performance#hasBatteryPerformance
Links a battery to its electrochemical performance and in-use state data.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-properties
- has Property op
- has domain
- Battery c
- has range
- Battery Performance c
has battery state recordop back to ToC or Object Property ToC
IRI: https://w3id.org/eudpp/battery-performance#hasBatteryStateRecord
Links a battery to one dated record of its in-use state. A battery carries as many records as there are readings; no ordering property is declared, the as-of date orders the series.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-properties
- has Property op
- has domain
- Battery c
- has range
- Battery State Record c
has temperature exposureop back to ToC or Object Property ToC
IRI: https://w3id.org/eudpp/battery-performance#hasTemperatureExposure
Links a battery to its in-use thermal exposure data.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has super-properties
- has Property op
- has domain
- Battery c
- has range
- Temperature Exposure c
Data Properties
- as-of date
- C-rate of relevant cycle-life test
- capacity fade
- capacity threshold for exhaustion
- capacity throughput
- certified usable battery energy
- current self-discharge rate
- cycle-life reference test
- energy round trip efficiency fade
- energy throughput
- evolution of self-discharge rates
- expected lifetime in calendar years
- expected lifetime: number of charge-discharge cycles
- information on accidents
- initial internal resistance of battery cell and pack
- initial round trip energy efficiency
- initial self-discharge rate
- internal resistance increase of pack
- maximum permitted battery power
- maximum voltage
- minimum voltage
- nominal voltage
- number of deep discharge events
- number of full charging and discharging cycles
- number of overcharge events
- original power capability
- power fade
- rated capacity
- ratio between nominal battery power and battery energy
- remaining capacity
- remaining power capability
- remaining round trip energy efficiency
- remaining usable battery energy
- round trip energy efficiency at 50% of cycle life
- state of certified energy (SOCE)
- state of charge (SoC)
- temperature information
- temperature range idle state, lower boundary
- temperature range idle state, upper boundary
- time spent charging during extreme temperatures above boundary
- time spent charging during extreme temperatures below boundary
- time spent in extreme temperatures above boundary
- time spent in extreme temperatures below boundary
as-of datedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#asOfDate
The date and time the values of this record were read. xsd:dateTimeStamp rather than xsd:dateTime: the time zone offset is then mandatory, so no separate offset property is needed.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- date Time Stamp
C-rate of relevant cycle-life testdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#cRateOfCycleLifeTest
Measurement parameter for 'Expected lifetime: Number of charge-discharge cycles': applied charge and discharge rate in terms of rated capacity (C-rate) of the relevant cycle-life reference test. Unit: ampere per ampere-hour (A/Ah).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
capacity fadedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#capacityFade
The decrease over time and upon usage in the amount of charge that a battery can deliver at the rated voltage, with respect to the original rated capacity as declared by the manufacturer. Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
capacity threshold for exhaustiondp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#capacityThresholdForExhaustion
The percentage of SOCE (State of Certified Energy), above which the battery is still considered operational as EV battery in its current life, as provided by the economic operator. Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Durability c
- has range
- decimal
capacity throughputdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#capacityThroughput
The overall sum of the capacity throughput over the battery lifetime at a specific time during usage. Unit: ampere-hour (Ah).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
certified usable battery energydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#certifiedUsableBatteryEnergy
The usable battery energy according to the procedure in the UN GTR No 22 as determined during the certification of the vehicle. Unit: kilowatt-hour (kWh).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
current self-discharge ratedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#currentSelfDischargeRate
The change of the self-discharge rate in an idle state of the battery in reference conditions (temperature etc.) at aging parameter x, e.g. after a certain amount of storage time or number of cycles. Unit: percent per month (%/month).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
cycle-life reference testdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#cycleLifeReferenceTest
The reference test for 'Expected lifetime: Number of charge-discharge cycles'.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- string
energy round trip efficiency fadedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#roundTripEnergyEfficiencyFade
The decrease of round trip energy efficiency as percentage. Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
energy throughputdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#energyThroughput
The overall sum of the energy throughput over the battery lifetime at a specific time during usage. Unit: kilowatt-hour (kWh).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
evolution of self-discharge ratesdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#selfDischargeRateEvolution
The change of self-discharge over time and usage, as percentage calculated from the initial and current self-discharge rate. Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
expected lifetime in calendar yearsdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#expectedLifetimeCalendarYears
Expected lifetime under the reference conditions for which the battery has been designed, in calendar years. Unit: year.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Durability c
- has range
- decimal
expected lifetime: number of charge-discharge cyclesdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#expectedLifetimeCycles
Expected lifetime under the reference conditions for which the battery has been designed, in number of charge-discharge cycles (except for non-cycle applications).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Durability c
- has range
- integer
information on accidentsdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#accidentInformation
Information on accidents affecting the battery, including when incorporated in equipment it is powering, as a link to the relevant resource.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Accident Event c
- has range
- any U R I
initial internal resistance of battery cell and packdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#initialInternalResistance
'Quotient of change of voltage of a battery by the corresponding change in discharge current under specified conditions' (IEV 482 03 36), at begin of life, for battery cell and pack (module recommended). Unit: ohm.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
initial round trip energy efficiencydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#initialRoundTripEnergyEfficiency
The ratio of the net energy delivered by a battery during a discharge test to the total energy required to restore the initial state of charge by a standard charge (see Regulation (EU) 2023/1542, Annex IV (6)). Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
initial self-discharge ratedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#initialSelfDischargeRate
The self-discharge rate in an idle state of the battery in reference conditions (temperature etc.) at begin of life. Unit: percent per month (%/month).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
internal resistance increase of packdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#internalResistanceIncrease
The increase over time and upon usage of internal resistance, for the pack (cell and module recommended). Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
maximum permitted battery powerdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#maximumPermittedBatteryPower
The value of maximum permitted power the battery is rated for and reflects the data relevant for power limits. Unit: watt (W). Declared as Integer [W] in the BatteryPass-Ready long list; xsd:decimal retained per the Gap Analysis decision (open question to BatteryPass-Ready).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
maximum voltagedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#maximumVoltage
The upper voltage limit that the safe operation of the battery is rated for. Unit: volt (V).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
minimum voltagedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#minimumVoltage
The lower voltage limit that the safe operation of the battery is rated for. Unit: volt (V).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
nominal voltagedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#nominalVoltage
The suitable approximate value of the voltage used to designate or identify the battery. Unit: volt (V).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
number of deep discharge eventsdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#numberOfDeepDischargeEvents
The number of occasions, in which voltage has dropped below the lower operational limit as provided in the battery passport. In-use event counter.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- integer
number of full charging and discharging cyclesdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#numberOfFullCycles
In-use number of (full) charging and discharging cycles.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- integer
number of overcharge eventsdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#numberOfOverchargeEvents
The number of occasions, in which voltage has increased above the upper operational limit as provided in the battery passport. In-use event counter.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- integer
original power capabilitydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#originalPowerCapability
The amount of energy that a battery is capable to provide over a given period of time under reference conditions. Unit: watt (W).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
power fadedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#powerFade
The decrease over time and upon usage in the amount of power that a battery can deliver at the rated voltage. Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
rated capacitydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#ratedCapacity
The total number of ampere-hours that can be withdrawn from a fully charged battery under reference conditions. Unit: ampere-hour (Ah), or milliampere-hour (mAh) for LMT batteries.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
ratio between nominal battery power and battery energydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#powerToEnergyRatio
The suitable approximate value of the power capability used to designate or identify the battery, while the battery energy is determined in reference conditions to be defined. Unit: watt per watt-hour (W/Wh). Declared as Integer [W/Wh] in the BatteryPass-Ready long list; xsd:decimal retained per the Gap Analysis decision (open question to BatteryPass-Ready).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
remaining capacitydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#remainingCapacity
The corresponding in-use data attribute to rated capacity. Unit: ampere-hour (Ah).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
remaining power capabilitydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#remainingPowerCapability
The amount of energy that a battery is capable to provide over a given period of time under reference conditions at a distinct point in time during its usage. Unit: watt (W).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
remaining round trip energy efficiencydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#remainingRoundTripEnergyEfficiency
The in-use analogy to the initial round trip energy efficiency: the ratio of the net energy delivered by a battery during a discharge test to the total energy required to restore the initial state of charge by a standard charge. Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
remaining usable battery energydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#remainingUsableBatteryEnergy
The usable battery energy at the present point in the lifetime of a battery as determined according to the procedure in the UN GTR No 22. Unit: kilowatt-hour (kWh).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
round trip energy efficiency at 50% of cycle lifedp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#roundTripEnergyEfficiencyAt50PercentCycleLife
The ratio of the net energy delivered by a battery during a discharge test to the total energy required to restore the initial state of charge by a standard charge, measured at 50% of cycle life (see Regulation (EU) 2023/1542, Annex IV (6)). Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery Performance c
- has range
- decimal
state of certified energy (SOCE)dp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#stateOfCertifiedEnergy
The measured or on-board usable battery energy performance at a specific point in its lifetime, expressed as a percentage of the certified usable battery energy. Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
state of charge (SoC)dp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#stateOfCharge
The available energy or charge in a battery expressed as a percentage of rated capacity as declared by the manufacturer. When the battery's state of health is no longer equal to its initial condition, SoC refers to the maximum energy or charge that can be stored in the battery at the time of charging. Unit: percent (%).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
temperature informationdp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#temperatureInformation
Temperature information regarding operating environmental conditions. Unit: degree Celsius (°C).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
temperature range idle state, lower boundarydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#temperatureRangeIdleStateLowerBoundary
The lower boundary of the surrounding temperature range. Unit: degree Celsius (°C).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Temperature Exposure c
- has range
- decimal
temperature range idle state, upper boundarydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#temperatureRangeIdleStateUpperBoundary
The upper boundary of the surrounding temperature range. Unit: degree Celsius (°C).
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Temperature Exposure c
- has range
- decimal
time spent charging during extreme temperatures above boundarydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#timeSpentChargingInExtremeTemperaturesAboveBoundary
The aggregated time, in which the battery is charged, while temperatures above the upper boundary of the temperature range as defined in 'Temperature range idle state, upper boundary' are prevalent. Unit: minute.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
time spent charging during extreme temperatures below boundarydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#timeSpentChargingInExtremeTemperaturesBelowBoundary
The aggregated time, in which the battery is charged, while temperatures below the lower boundary of the temperature range as defined in 'Temperature range idle state, lower boundary' are prevalent. Unit: minute.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
time spent in extreme temperatures above boundarydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#timeSpentInExtremeTemperaturesAboveBoundary
The aggregated time, in which temperatures above the upper boundary of the temperature range as defined in 'Temperature range idle state, upper boundary' are prevalent. Unit: minute.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
time spent in extreme temperatures below boundarydp back to ToC or Data Property ToC
IRI: https://w3id.org/eudpp/battery-performance#timeSpentInExtremeTemperaturesBelowBoundary
The aggregated time, in which temperatures below the lower boundary of the temperature range as defined in 'Temperature range idle state, lower boundary' are prevalent. Unit: minute.
- Is defined by
- https://w3id.org/eudpp/battery-performance
- has domain
- Battery State Record c
- has range
- decimal
Annotation Properties
- bibliographic Citation
- contributor
- created
- creator
- description
- issued
- license
- measurement unit
- modified
- preferred Namespace Prefix
- preferred Namespace Uri
- references
- source
- title
bibliographic Citationap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/bibliographicCitation
contributorap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/contributor
createdap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/created
creatorap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/creator
descriptionap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/description
issuedap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/issued
licenseap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/license
measurement unitap back to ToC or Annotation Property ToC
IRI: https://w3id.org/eudpp/battery-performance#measurementUnit
The measurement unit of the annotated datatype property, as an IRI of the SI Digital Framework (https://si-digital-framework.org/SI/units/). Used because the values are plain typed literals in this pass and not dpp:QuantitativeProperty instances, so dpp:hasMeasurementUnit - an object property on QuantitativeProperty - does not apply. Where the unit has no IRI in the framework the annotation is absent and the unit stays in rdfs:comment; the cases are listed in the module header.
- Is defined by
- https://w3id.org/eudpp/battery-performance
modifiedap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/modified
preferred Namespace Prefixap back to ToC or Annotation Property ToC
IRI: http://purl.org/vocab/vann/preferredNamespacePrefix
preferred Namespace Uriap back to ToC or Annotation Property ToC
IRI: http://purl.org/vocab/vann/preferredNamespaceUri
referencesap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/references
sourceap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/source
titleap back to ToC or Annotation Property ToC
IRI: http://purl.org/dc/terms/title
Legend back to ToC
c: Classes
op: Object Properties
dp: Data Properties
op: Object Properties
dp: Data Properties
Acknowledgments back to ToC
The authors would like to thank Silvio Peroni for developing LODE, a Live OWL Documentation Environment, which is used for representing the Cross Referencing Section of this document and Daniel Garijo for developing Widoco, the program used to create the template used in this documentation.